How to Use Thread Tape

1. Clean the threads: Wipe dirt, oil, or debris off the male pipe end.
2. Leave the first thread bare: Start wrapping from the second thread back to avoid blocking the pipe opening.Wrap clockwise:
3. Face the end of the pipe and wrap in a clockwise direction (the same way you screw on the fitting) so it does not unravel when tightened.
4. Keep it tight: Pull the tape taut so it molds tightly into the grooves of the threads.
5. Apply 3 to 4 turns: Go around the pipe 3 to 4 times for standard tape, then pull to snap or tear it off.Smooth it down:
6. Press the tape into the threads with your fingers before screwing the pieces together.